• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning and prevents thieves from driving your vehicle with your original keys. Our most recent immobiliser is connected to your vehicle's CAN data network and a unique pin must be entered to start the engine.

Ghost unlike trackers, doesn't emit radio frequency signals and cannot be identified by diagnostic tools. It does not have any LED indicators or buttons to indicate its presence in your van or car.

Anti-key Cloning

The ghost immobiliser was designed to combat key cloning and hacking. The device connects to your vehicle's CAN data network and creates a unique pin code push sequence using the buttons that are factory-installed on your dashboard as well as the steering wheel. This stops the thief from being able start your vehicle. If the wrong PIN is entered, it will prevent your engine from starting which makes it impossible to drive off with your joy and pride.

Ghost immobilisers use new technology that is very difficult for thieves to beat. Contrary to physical deterrents, such as wheel locks and steering locks which can be cut or stolen the ghost immobiliser is a discreet electronic device that cannot be detected by common thieves because it doesn't emit radio signals and works silently.

This next-generation immobiliser will protect your car against a variety of threats, including key hacking, relay attacks and cloned copies. It can also stop a thief adding a key or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN.

Contrary to other immobilisers, the ghost immobiliser 2 does not require a remote or key fobs for operation. It is able to be deactivated by the driver's smartphone by using a simple app. This is ideal when you need to give your car away for valet parking, or for servicing without the key fobs.

The Autowatch Ghost-II represents the latest version of the Ghost immobiliser. It is designed to be as easy and easy to use as it is possible, while remaining as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network, meaning there are no extra wires that are able to be hidden or easily discovered. It also has an integrated feature that allows you to disable your Ghost-II by simply connecting to the vehicle's Bluetooth and you'll be able to go out and drive hassle free.

OBD port hacking

OBD port hacking is the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than an laptop, an app, and a few cables, which can be purchased on the internet for under PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want including changing fault codes and tuning your car to taking away your pride and joy in less than a minute.

If you have an Ghost immobiliser, it can prevent your car from being stolen with this method by needing a unique PIN sequence is entered alongside your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It even comes with a Service/Valet option that allows your vehicle to start without the need for a PIN code.

To make use of an OBD hacking device you require an operating system that is capable of interpreting the OBD protocol, which can be bought for less than PS100 on eBay or Amazon. You will also need a cable with OBD pins which are connected to the CAN bus, these can be purchased on Amazon or Ebay for around PS50. The cable must be spliced into the wiring harness of your car, such as the radio wiring harness.

Once the hacker has gained a connection to your vehicle's OBD port, they can send diagnostics requests to the system at a high baud rate that can crash the CAN and block systems in your car from functioning. This could cause the engine to stall or even lock doors, and even the brakes to activate.

No remotes or keys are required.

An immobiliser for your car is a great piece of anti theft technology that is used by billions of modern cars around the world. Utilizing engine ECU software to prevent cars from starting if a fake transponder signal is sent to it, an aftermarket immobiliser is a great way to protect your vehicle.

However, it could be easy for a thief to circumvent an immobiliser system if they have access to the code that allows them to disable it. A burglar can easily remove the battery from most key fobs by removing them. They can then use a simple tool in order to remove the circuit board inside an immobiliser and replace it with blank. They will then be capable of starting your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser communicates with the engine ECU (Engine Control Unit) through a discreet and silent CAN data circuit that is undetectable with diagnostic tools, such as those used by high-tech thieves. It also doesn't utilize a traditional key fob with LED indicators, so it is able to go unnoticed at sight.

You may need to deactivate autowatch ghost immobiliser installation's Ghost 2 auto protection at certain times like during valet parking or a service. The ghost CAN immobiliser has a special mode for this, called "Service Mode that can be activated with just pressing an app on your smartphone. The car is still operational however the maximum speed is restricted to 36mph.

If you'd like more information about the TASSA certified ghost immobiliser, please contact us today to arrange a demonstration in our workshop. A member of the team will run through a full breakdown of the system's operation and provide you with owner manuals, installation certification, Ghost 2 emergency card and security assurance.

Simple process to change the PIN code

Ghost is a new generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicles CAN data network and a personalised PIN code is programmed in it by pressing buttons on your steering wheel and dash. The device does not emit RF signals, which means it is not able to be tampered with. This makes it undetectable by sophisticated RF scanning or code grabbing techniques that modern thieves employ.

The PIN code can be altered to block earlier drivers or include an override code in case you forget the sequence. The installer will demonstrate the process to do this during installation. The system also includes the valet mode feature that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can repair the car without needing to know the pin code. This is a great choice for those who do not wish their pin sequence to be disclosed, but wish to leave their car with valet parking or service.

Ghost is an individual system that utilizes the buttons on your car to create an individual and interchangeable PIN sequence. This sequence is entered using the smartphone app, meaning no extra LED indications are thrown and your car is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

A ghost immobiliser, unlike key fobs which require you to press buttons, is discreetly placed under the dash or steering wheel. Only you will know it's there. The device is connected to your vehicle's CAN data network and an individual PIN code is programmed into it by using the buttons already on your vehicle. The system won't allow your car to start until this code is entered. This means that thieves are unable to copy the keys to your car or use the OBD to hack into it.

ghost 2 immobiliser reviews is a great option for all vehicles that use electric vehicles, vans, motorhomes and bikes. It's also extremely versatile and can be set to deactivate under different circumstances. For instance, it can be set to enter Valet mode when the vehicle is transported to a valet parking or service company. This permits you to drive within a 30mph speed limit and the ghost immobiliser fitting near me immobiliser will activate itself when your vehicle is returned to your home.

The device can be reset at anytime to your personal PIN code. This is a great option if you forget the code or when the device ceases to function.

The device is undetectable by anyone who doesn't know what it is. It does this by analyzing the buttons on your steering wheel and dashboard and analyzing the data they send in order to identify the exact button that was hit. This makes it a safe and reliable security system that cannot be altered by RF scanning or jamming, or a door lock pick set.