• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may want to consider using the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed window repairs near me glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is an easy procedure, but it is easier to do when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to offer advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it could be cheaper to replace them than to repair them. So, if you're having issues with your upvc windows, it is always recommended to seek assistance from a professional immediately.