• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a Kia Sportage Replacement Key

For many 2012 kia optima key fob models, the key contains an integrated keyless entry system. This key is similar to remote controls and can be exchanged by a Kia dealer.

Key fobs can stop working due to a variety of reasons, including batteries that are dead, worn-out buttons signal interference or water damage. Here are some helpful tips on how to get your Kia Sportage replacement key working again.

How do you replace the remote key or smartkey?

The battery inside your Kia's smart key will eventually need to be replaced, regardless of whether it's a remote or a push-to-start one, or a regular key that doesn't have transponder. This is particularly relevant if your vehicle displays a message that indicates the smart or remote keys aren't powered.

It's a fairly simple process. To replace the battery of the keyfob remove the mechanical key from the slit at the back of the fob. Then, push the cover off. Inside the key fob will be tiny screws that hold the battery in the correct position. Remove the old battery by unwinding the screw using a small screwdriver. Install the new battery and then close the gap on the key fob.

Test the key fob by pressing the lock and unlock buttons. If the doors unlock and lock as expected, then you're all set! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or you need to run errands around Brandon.

Note: Some key fobs (transponder chip or smart keys) might require their programming completed. This requires a particular programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) do not require programming. If you're required to reprogramme your key, you'll have to note the key code number on the key code tag.

How do I replace the battery?

If your Kia key fob is not responding when you press the lock or unlock button on the fob, it is a clear indication that the battery needs to be replaced. A low battery may also cause other problems like the check engine light turning on or a delay in cranking the engine. Fortunately replacing the key fob battery is a relatively easy DIY task that requires only a few basic tools.

Before you begin the process ensure that your vehicle is off and all doors are closed. Find the small metal or plastic piece on the bottom of the key fob. Press it until the metal key comes out. This key can be inserted into the driver door handle to unlock your car.

To replace the battery on the key fob remove the cover at the rear. Use a pry tool to loosen the latch that holds the black negative cable. Remove the old battery and then orient the replacement battery to ensure that its "+" side is facing you, and Kia Picanto Key Fob Replacement the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position with care to avoid using too much force to avoid damaging or breaking the contacts on the metal.

After installing the new battery, turn the key fob off and on in the ignition until the door locks up. You can then test your Kia key fob to check whether it's functioning properly again.

How to replace the smart key?

You can have the standard keyfob or Smart Key depending on the model of Kia Sportage. The difference between them is that the smart key comes with tiny mechanical key blade tucked inside it, while the standard key fob does not. Both key fobs have a battery that will eventually require replacement. Fortunately, it's an easy process that takes just two minutes.

Make sure to shut off your Kia Picanto Key Fob Replacement and be on a flat, well-lit surface before you begin. Keep in mind that there are tiny pieces inside the fob which could be snagged if not cautious.

The release button for the small size is located on the lower backside. It could be a circular or rectangular slot. You can open the key fob by pressing the button.

After the key fob has been open, remove the battery. The new battery is a CR-2032 that can be bought online or from your local auto parts store. After installation you should be able to lock or unlock your car with your key fob even if the engine isn't running!

How do you replace the mechanical key

The Kia keyfob is a great convenience, allowing us to lock or unlock our car by pressing a button. As with all devices, the Kia key fob may have issues. Luckily, there are ways to troubleshoot these issues and ensure that our key fobs are in good working order for the long term.

A dead or low-quality battery is one of the most frequently encountered issues. This can cause your fob to stop working or work intermittently. If this is the case then try replacing the battery with a new one.

If this does not resolve the issue, use a flathead screwdriver standard to push the fob's casing made of plastic open. Be cautious not to damage any internal components or scratch the plastic. After the battery has been removed and replaced, you can replace it with a new one.

Close and open the door with the mechanical key. (Every Kia fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to confirm it's functioning properly. If the key fob isn't working, call a locksmith or dealer to help resolve the problem. To avoid a lockout in the future ensure that you have an emergency key that will be able to work with all door and trunk cylinders.