• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacements may be required in the event of serious damage like broken glass or a broken window frame.

But many other issues can be addressed to extend the lifespan of your windows. Common issues include:

Cracked or Broken Panes

If it's an unintentional rock thrown by your lawnmower or a tree branch that has been blown by high winds, damaged windows are not just visually unappealing, but also can result in higher electric bills since the broken pieces allow cold air into your home. It's fairly easy to fix windows that have broken panes.

Begin by carefully removing glass using gloves and sunglasses. You may have to employ a utility knife to break loose any remaining putty or glazing compound around the edges of the frame. Then, use a soft cloth or paper towel to wipe the glass's surface and the wood of the frame.

After the area is cleaned then apply a waterproof silicone caulking to the frame's perimeter. This will stop water from leaking into the frame through the cracks and result in further damage.

If you have double glazing near me-pane glass cracks that are severe could damage the gas layer between the panes and render your windows less efficient in insulating. If the crack is severe enough that it compromises the strength of the window, or if the pane inside is not there you might need to contact a professional.

Cracks in thermal stress can happen when there's a dramatic difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If the cracks are on two sides of a window it is best to replace it instead of attempt to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It will also keep out cold winds and bugs. You can also cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This isn't a permanent fix, but it will keep cold air out and insects away from your home. If you notice cracks appearing on your windows that are older You should consult the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is one of the most frequent problems that plague windows. It can damage a home's appearance and create a security hazard. It is, however, possible to repair rotted wood. It is first necessary to address the cause of the wood rot. Check for roof leaks and other places where water could get into the wood.

The next step is to remove the rotten parts of the window frame. This can be accomplished with the use of a chisel, rasp or claw hammer. After removing the decayed wood, you'll need to replace it with fresh wood. Pre-treated wood is suggested for this task, since it is resistant to rot. If you are not able to replace the timber that has rotted, you can use filler and wood hardener to repair the damaged area. Many hardware stores will have this type of product. To get the best results, adhere to the instructions on the product label.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant to the wood. A product such as Sikkens is an excellent option for this task.

You can also apply an epoxy filler with two parts to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is important to follow the directions on the label. After the epoxy filler has dried, you are able to smooth the wood's surface. Start with a rough sandpaper and then move on to a smoother grade.

The last thing you would like to do is make the rotted area even worse by exposing it to more water. So, it's an ideal idea to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. Then, you can apply the waterproof wood sealant.

The W won't open

There are a variety of reasons windows don't open. The house could have settled or the wooden frames might have warped due to wet weather. There is also the possibility that someone secured them with a nail for security. However, with a bit of patience and the right tools, Window Repairs many windows that are locked can be opened.

Accumulated debris or gunk can be a major reason of the window not opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Additionally, metal hardware may get rusty when in contact with humidity and direct sunlight. Spraying grease on these areas can help to prevent oxidation and keep your windows functioning properly.

Stuck windows could also be the result of the breaking or loosening of the pulleys that are used to raise and lower the window. These parts can be weakened and Window Repairs obstructed if they are located at least two floors above surface.

If you have difficulty opening a door, you can use a pry-bar to gently open the door. Place a block of wood on the frame to give your pry bar more leverage, and be careful not to damage the window or the wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the cause of a window that won't raise or lower. Depending on the manufacturer of your windows, you'll be required to refer to the owner's manual for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they won’t open, then it's probably time to replace them. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let your windows go from functional to unusable since windows that aren't properly closed can make your home vulnerable to water damage and burglary. Contact our team today for more information on our replacement windows and our services!